Creality · ranked #6 of 9
K1C
Best for enclosed speed on a budget.
Spec sheet
- Street price
- $559
- Build volume
- 220 × 220 × 250 mm
- Max bed temp
- 100°C
- Max hotend temp
- 300°C
- Enclosure
- Fully enclosed
- Hardened nozzle
- Hardened from the factory
- Multi-color
- single color only
- Speed class
- Very fast
What it prints
All 10 materials in the database, run through the compatibility rules: 10 clean · 0 with mods · 0 not recommended.
- PLAPrints clean
- PLA+Prints clean
- PETGPrints clean
- ABSPrints clean
- ASAPrints clean
- TPU 95APrints clean
- PC (Polycarbonate)Prints clean
- PA (Nylon)Prints clean
- PLA-CFPrints clean
- PETG-CFPrints clean
Our verdict
The K1C is a $559 enclosed machine with a bed that reaches 100°C and a hotend that reaches 300°C — which means it prints 10 of our 10 materials clean and none are off the table. The enclosure is the headline: ABS and ASA print without a draft shield, and high-temp materials get the still air they need.
Carbon-fiber filaments are a load-and-go affair — the hardened nozzle is stock, so PLA-CF and PETG-CF carry no asterisk here. It is a single-color machine — multi-color is not on its roadmap.
Who it's for: enclosed speed on a budget. Cross-shop the rivals on the right, or check its full row on the match matrix.